(727) 808-8602

 
Home Latest New Products Customers' Rides Orders
What a crank-scraper is and other technical info... Some comments on our products...
 
Alfa-Romeo, AMC, BMC, BMW, Buick, Buick-Rover, Cadillac, Chevrolet, Chrysler/Mopar, Datsun-Nissan, Fiat-Lancia, Ford, GM, Honda/Acura, IHC, Jaguar, Lotus, Mazda, Mercedes, MGA/MGB, Mitsubishi, Oldsmobile, Opel, Pontiac, Porsche, Renault, Suzuki-Geo, Toyota, Triumph, VW, Volvo

 

 

We will try to keep this list updated but if you do not see your engine listed here please ask!  We can  do custom stroker or knife-edge crank designs.  We can provide plastic templates for initial fitting and adjustment.

 

We have included some representative pictures of the scrapers we make.  If you would like to see a picture of a particular scraper please ask -- we would be more than happy to send one through.

 

Our standard scrapers cost only $59.95 unless noted.  When available (please enquire) our zero-clearance TeflonŽ scrapers run an additional $100.00 to the cost of the standard steel scraper unless noted.

 

Remember, your vehicle may have an engine made by a different manufacturer so check both product lines.  If you are still unsure, please contact us.

 

Opel

 

 

 

 L4: 1.5, 1.9, 2.2, 2.4

New! Dual scrapers that operate on both the up and down stroke of the engine!  $69.95

          

TeflonŽ bladed scraper also available:

TeflonŽ framework on block:

 

Windage tray with complete coverage of the rotating assembly -- this is for the 70mm stroke engines.  This kit includes eight grade 12.9 socket head cap screws to replace the stock fasteners on the four main caps where the attachment brackets sit.

This tray has been checked on the stock steel pan and alloy pan pictured for fit.  It fits early and later versions of 1.9 main caps. It is designed to work in harmony with the scrapers but can be installed alone, of course.  The tray is hand fabricated and requires an incredible amount of work to make.  $349.95

 

Copyright 2002-2010 All rights are reserved on our product designs -- a great deal of hard work goes into each one.

TeflonŽ is a registered trade mark of E.I. du Pont de Nemours and Company. Only DuPont makes TeflonŽ resin sourced by Ishihara-Johnson Crank Scrapers from authorized DuPont licensees.

We Ship World Wide!

 

 

If you are in need of a dry sump system we suggest you contact Armstrong Race Engineering.  They provide top quality components and many times our scrapers can be used in combination with their pans.

 

They make top quality parts.

 

  

RESEARCH & DEVELOPMENT * MANUFACTURE * SALES
Makers of Custom Solid Copper Head Gaskets
 

 

    
Jean-Claude 1919-2003
A good friend.