(727) 808-8602

 
Home Latest New Products Customers' Rides Orders
What a crank-scraper is and other technical info... Some comments on our products...
 
Alfa-Romeo, AMC, BMC, BMW, Buick, Buick-Rover, Cadillac, Chevrolet, Chrysler/Mopar, Datsun-Nissan, Fiat-Lancia, Ford, GM, Honda/Acura, IHC, Jaguar, Lotus, Mazda, Mercedes, MGA/MGB, Mitsubishi, Oldsmobile, Opel, Pontiac, Porsche, Renault, Studebaker, Suzuki-Geo, Toyota, Triumph, VW, Volvo

 

 

We will try to keep this list updated but if you do not see your engine listed here please ask!  We can  do custom stroker or knife-edge crank designs.  We can provide plastic templates for initial fitting and adjustment.

 

We have included some representative pictures of the scrapers we make.  If you would like to see a picture of a particular scraper please ask -- we would be more than happy to send one through.

 

When available (please enquire) our zero-clearance TeflonŽ scrapers run an additional $100.00 to the cost of the standard steel scraper unless noted.

 

Remember, your vehicle may have an engine made by a different manufacturer so check both product lines.  If you are still unsure, please contact us.

 

Chrysler/Mopar

 

 

 LA: 273, 318, 340, 360     Two and four bolt main versions available; many strokes available; modified counterweight designs available

Dual scraper design works on both the down stroke and up stroke of the engine!  $79.95

Teflon version for $179.95:

 

New racing downstroke LA scraper with shield and screening. This version is pan and stroke specific -- also it is important to know what main caps you are running.  If your pan is similar in design it can be adjusted by the owner using basic sheet metal hand tools.  Designs for additional pans will be done with owner's pan being shipped to shop for fitting or detailed pictures being provided.  This design reaches into the 1st quadrant ATDC and directs oil into a shielded area.  This area has directional screening within it to slow the oil and then protect it as it travels to the sump floor.  The louvers are adjustable.  This price is for the downstroke scraper only $199.95

Version for use with aftermarket 2-bolt halo girdle:

$269.95 for the racing downstroke scraper and steel upstroke scraper.  $369.95 for the racing downstroke scraper and Teflon bladed upstroke scraper.

 

Congratulations to Myron Piatek and Locomotion Racing, 2008 Division 2 IHRA Champion!

 

 

 

 

Copyright 2002-2011 All rights are reserved on our product designs -- a great deal of hard work goes into each one.

TeflonŽ is a registered trade mark of E.I. du Pont de Nemours and Company. Only DuPont makes TeflonŽ resin sourced by Ishihara-Johnson Crank Scrapers from authorized DuPont licensees.

We Ship World Wide!

 

Jean-Claude 1919-2003
A good friend.